Welcome to the NIXY Team!

We are Southern California adventurers dedicated to providing you with top-quality inflatable SUPs and accessories. The NIXY Ventus Electric Pump is designed to make inflating your paddleboards, kayaks, and other inflatable gear quick and effortless. Therefore, follow this guide to get the best performance from your pump and ensure a safe and enjoyable experience.

Features

• Firstly, Dual Stage Inflation: High-volume turbine blower and high-pressure piston for efficient inflation up to 20 PSI.
• Additionally, Digital LCD Display: Easy-to-read display for setting and monitoring pressure.
• Moreover, Automatic Shut-Off: Pump stops when the set pressure is reached.
• Furthermore, Compact & Portable: Lightweight design with a convenient carry handle.
• Finally, Durable Construction: Built with high-quality materials for long-lasting performance.

Before You Begin

CAUTION:

• Ensure you use the pump in a dry environment away from water and moisture.
• Do not leave the pump unattended while in use.
• Also, check the maximum pressure recommended for your inflatable product before inflating.

WARNING: Before inflating, please check the maximum pressure recommended for your inflatable product.

To Inflate:

1. Power Connection:
   Firstly, connect the DC plug into a 12V DC socket or use the alligator clips to attach to battery terminals.
2. Attach the Hose:
   Next, connect one end of the hose to the INFLATE port of the pump and the opposite end into the valve of your inflatable product.
3. Select Pressure Unit:
   Then, press the (PSI/BAR) pressure unit button to select the correct measuring unit.
4. Set Desired Pressure:
   After that, press the (+) or (-) buttons to select the desired final pressure (range from 0-20 PSI).
5. Start Inflation:
   Once you select the desired pressure, press the ON/OFF button to start inflating.
   VENTUS will start working in the LOW-Pressure mode (1st stage). Once the pump reaches 1 PSI, it will switch to HIGH-Pressure mode (2nd stage).
6. Adjust Pressure if Needed:
   During the inflating process, you can adjust the final pressure by pressing the (+) or (-) buttons.
7. Automatic Shut-Off:
   Finally, VENTUS will shut off once it reaches the selected PSI. You can stop the pump at any time by pressing the ON/OFF button.
8. Disconnect After Use:
   After inflating, disconnect the pump from the power source.

NOTE: When the pump reaches its second stage, it will change to a louder noise and higher vibration level until reaching the desired PSI and shutting off automatically.

NOTE: Anytime you wish to stop the VENTUS while operating, simply press the OFF button. To start again, press the ON button for 3 seconds.

To Deflate:

1. Connect the Hose:
   First, connect one end of the hose to the DEFLATE port of the pump and the opposite end into the HR valve.
2. Start Deflation:
   Next, press the ON/OFF button to begin deflation.
3. Manual Stop:
   Finally, you must press the OFF button manually to STOP deflating.

Troubleshooting Tips:

• Pump Not Turning On: Ensure the power connection is secure and your vehicle is running.
• Slow Inflation: Check for leaks in the hose or connections. Ensure the valve is fully open.
• Automatic Shut-Off Not Working: Verify that the desired pressure is set correctly and is within the pump's maximum limit.

Maintenance and Care:

• Clean Regularly: Wipe the pump with a dry cloth after each use to remove dust and debris.
• Store Properly: Keep the pump in a cool, dry place away from direct sunlight and moisture.
• Check Connections: Regularly inspect the hose and power cord for any signs of wear or damage.

Enjoy Your Adventures

With the NIXY Ventus Electric Pump, you can inflate your gear quickly and efficiently, giving you more time to enjoy your outdoor activities. Whether you're heading to the lake or exploring the coastline, this pump ensures a hassle-free start to your adventures.

For more information and to purchase the NIXY Ventus Electric Pump, visit our product page.

CLICK HERE for the Ventus Electric Pump product page.

Check out a review of the Ventus Electic Pump HERE!